Saw Arbor Saw Arbor
Outfeed Scissor lift Stacking system Outfeed Scissor lift Stacking system
AP Automatic Panel Feeder AP Automatic Panel Feeder
1 year warranty
Characteristics & operation

SYSTEM'S MAIN FUNCTIONS

  • A wood sheet is placed on the AP automatic panel feeder, which separates the panels at the entry point and feeds them towards the first chain transfer;
  • The ERS-96 receives the panels. This Grooving Saw is mainly designed to make the curved groove under the core layer;
  • The panel comes out of the ERS-96 and is transferred by the second roller conveyor with chain transfer to the next step;
  • The panel is received by the RS-75, which cuts it into multiple strips with predetermined widths. This multiple blade rip saw can run at a feed rate of 75ft per minute and comes with a 40 HP motor for the arbor;
  • The strips are coming out from the saw and landing over a 5 x 8 exit scissor lift moving down between each layer of strips.

The RS-75 has a second motor for the feed rollers, which consist in four feed rollers in the bottom and four pressure rollers on the top. It has a 60'' width capacity for the panel.

The operator will need 15 to 20 minutes to swap the arbor from the order.

The AP Automatic Panel Feeder has a hydraulic power unit for moving the lift table, 3-finger pusher arm and motorization of rollers. Three (3) rollers are powered to bring bundle to reference line. All operations can be performed in manual, semi-automatic or automatic mode as desired.

This specific production line includes the following equipment:

Options & specifications

Available options on RS-75 and ERS-96 tooling:

  • Spacers of different widths manufactured according to the position of the grooves and edging strips;
  • Interchangeable Panel Support Bar.

RS-75 can be upgrated to HRS-120, which is a model that can go up to 120ft per minute feed rate. The HRS-120 has a base motor of 75 HP.